Ibanez Bass Workshop BTB866SC 6-string Singlecut Bass Guitar Weathered Black Low Gloss
|
|
|
|
|
|
|
|
| Quantity: | |
Add to Cart | |
;){kind=link}
Brand new Ibanez BTB866SCWKLS488859JIENLLXPI48208NIOBLK24880GOATS342069SCRABBLEMODELNAME in Weathered Black Low Gloss!
This bass will be fully setup before pickup/shipment. Photos are of the actual bass unless otherwise noted.
If you would like the bass set up any particular way, please get in touch with us!
Description:
The Ibanez BTB866SCWKL BTB Series Weathered Black Low Gloss 6 String RH Bass Guitar has an Ibanez Custom Electronics 3-band EQ w/Mid frequency switch.
5pc Maple/Walnut neck with Graphite reinforcement rods
The 5pc Maple/Walnut neck provides tonal clarity and superior attack.The Graphite reinforcement rods provides massive sustain and excellent stability.
Rosewood fretboard
Rosewood fretboard provides a well-balanced solid tone with a focused mid range.
Ash top / Ash / Okoume wing body
The Ash top imbues this bass with an exotic appearance and the Ash/Okoume body provides superior attack, bright and solid sound with rich sustain.
Bartolini® BH2 pickups
The Bartolini® BH2 pickups provide a tight bottom-end, punchy mid-range, and smooth response. The dual-coil style configuration maximizes articulation and a long blade pole piece widens the magnetic field, providing balanced string-to-string pickup response.
Ibanez Custom Electronics 3-band EQ
The Ibanez Custom Electronics 3-band EQ is our latest refinement on the concept of simple, straightforward, no-nonsense EQ control. The Boost and Cut for the Mid Control are each centered on slightly different frequencies, an innovation that delivers a preset range of the most favorable bass tones.
MR5 bridge
The Mono-Rail V is the ultimate bridge for bass string isolation. Each bridge is independently and securely locked down to the body for maximum vibration transfer without interference.
3-way Mid frequency switch
The 3-way Mid frequency switch allow players to change the mid-tone between 250, 450, and 700 Hz.
Detachable Finger ramp
A detachable Finger ramp is included for comfortable finger picking.
Neck-through construction
The neck-through construction contributes to massive sustain and smooth access to high fretboard positions.
Controls
With the bass held in the playing position, there are three small knobs located towards the lower edge of the body. Directionally, from the lower bout towards the neck these knobs control treble boost/cut, mid boost/cut, and bass boost/cut knob. Above these are two larger knobs closer to the bridge. Of these, the knob closest to the end of the body is the pickup balance, and the knob located towards the neck is the volume knob. There are two switches on this bass. The switch closest to the lower edge of the body is a 3-way mid frequency switch. When the switch is in neck position, mid boost peak is at 250Hz. When the switch is in center position, mid boost peak is at 450Hz. When the switch is in bridge position, mid boost peak is at 800Hz. The other switch closer to the middle of the bass is the EQ bypass switch. When the switch is in neck position, the EQ is off. When the switch is in bridge position, EQ is on. When EQ is off, the treble knob works as a passive tone control knob.
Frequency Response
The bass boost/cut frequency curve has a peak at 20 Hz, the variable width becomes smaller toward the high range, and the variable width becomes zero at about 1000 Hz. The variable range of the peak frequency is approximately ±15 dB. The treble boost/cut frequency curve draws a mountain-shaped curve with a peak at around 10,000 Hz and zero variable range around 100 Hz. The variable range of the peak frequency is approximately ±15 dB. The mid-boost/cut frequency curve creates a bell-shaped curve that peaks at a specific frequency, and the variable range becomes zero near 20 Hz and around 10,000 Hz. The frequency peak can be switched to 700, 450 and 250 Hz. The variable range of the peak frequency is approximately ±15 dB.
Specifications:
neck type: BTB6/5pc Maple/Walnut/neck-through w/Graphite reinforcement rods
top/back/body: Ash top/Ash/Okoume wing body
fretboard: Rosewood fretboard/Abalone dot inlay
fret: Medium stainless steel frets
number of frets: 24 + zero fret
bridge: MR5 bridge
string space: 17mm
neck pickup: Bartolini® BH2 neck pickup Passive
bridge pickup: Bartolini® BH2 bridge pickup Passive
equaliser: Ibanez Custom Electronics 3-band EQ w/Mid frequency switch
factory tuning: 1C,2G,3D,4A,5E,6B
strings: D'Addario® NYXL45130SL
string gauge: .032/.045/.065/.080/.100/.130
hardware color: Black
Neck Dimensions:
Scale: 889mm
a: Width: 54mm at NUT
b: Width: 85mm at 24F
c: Thickness: 20mm at 1F
d: Thickness: 22mm at 12F
Radius: 950mmR
This bass will be fully setup before pickup/shipment. Photos are of the actual bass unless otherwise noted.
If you would like the bass set up any particular way, please get in touch with us!
Description:
The Ibanez BTB866SCWKL BTB Series Weathered Black Low Gloss 6 String RH Bass Guitar has an Ibanez Custom Electronics 3-band EQ w/Mid frequency switch.
5pc Maple/Walnut neck with Graphite reinforcement rods
The 5pc Maple/Walnut neck provides tonal clarity and superior attack.The Graphite reinforcement rods provides massive sustain and excellent stability.
Rosewood fretboard
Rosewood fretboard provides a well-balanced solid tone with a focused mid range.
Ash top / Ash / Okoume wing body
The Ash top imbues this bass with an exotic appearance and the Ash/Okoume body provides superior attack, bright and solid sound with rich sustain.
Bartolini® BH2 pickups
The Bartolini® BH2 pickups provide a tight bottom-end, punchy mid-range, and smooth response. The dual-coil style configuration maximizes articulation and a long blade pole piece widens the magnetic field, providing balanced string-to-string pickup response.
Ibanez Custom Electronics 3-band EQ
The Ibanez Custom Electronics 3-band EQ is our latest refinement on the concept of simple, straightforward, no-nonsense EQ control. The Boost and Cut for the Mid Control are each centered on slightly different frequencies, an innovation that delivers a preset range of the most favorable bass tones.
MR5 bridge
The Mono-Rail V is the ultimate bridge for bass string isolation. Each bridge is independently and securely locked down to the body for maximum vibration transfer without interference.
3-way Mid frequency switch
The 3-way Mid frequency switch allow players to change the mid-tone between 250, 450, and 700 Hz.
Detachable Finger ramp
A detachable Finger ramp is included for comfortable finger picking.
Neck-through construction
The neck-through construction contributes to massive sustain and smooth access to high fretboard positions.
Controls
With the bass held in the playing position, there are three small knobs located towards the lower edge of the body. Directionally, from the lower bout towards the neck these knobs control treble boost/cut, mid boost/cut, and bass boost/cut knob. Above these are two larger knobs closer to the bridge. Of these, the knob closest to the end of the body is the pickup balance, and the knob located towards the neck is the volume knob. There are two switches on this bass. The switch closest to the lower edge of the body is a 3-way mid frequency switch. When the switch is in neck position, mid boost peak is at 250Hz. When the switch is in center position, mid boost peak is at 450Hz. When the switch is in bridge position, mid boost peak is at 800Hz. The other switch closer to the middle of the bass is the EQ bypass switch. When the switch is in neck position, the EQ is off. When the switch is in bridge position, EQ is on. When EQ is off, the treble knob works as a passive tone control knob.
Frequency Response
The bass boost/cut frequency curve has a peak at 20 Hz, the variable width becomes smaller toward the high range, and the variable width becomes zero at about 1000 Hz. The variable range of the peak frequency is approximately ±15 dB. The treble boost/cut frequency curve draws a mountain-shaped curve with a peak at around 10,000 Hz and zero variable range around 100 Hz. The variable range of the peak frequency is approximately ±15 dB. The mid-boost/cut frequency curve creates a bell-shaped curve that peaks at a specific frequency, and the variable range becomes zero near 20 Hz and around 10,000 Hz. The frequency peak can be switched to 700, 450 and 250 Hz. The variable range of the peak frequency is approximately ±15 dB.
Specifications:
neck type: BTB6/5pc Maple/Walnut/neck-through w/Graphite reinforcement rods
top/back/body: Ash top/Ash/Okoume wing body
fretboard: Rosewood fretboard/Abalone dot inlay
fret: Medium stainless steel frets
number of frets: 24 + zero fret
bridge: MR5 bridge
string space: 17mm
neck pickup: Bartolini® BH2 neck pickup Passive
bridge pickup: Bartolini® BH2 bridge pickup Passive
equaliser: Ibanez Custom Electronics 3-band EQ w/Mid frequency switch
factory tuning: 1C,2G,3D,4A,5E,6B
strings: D'Addario® NYXL45130SL
string gauge: .032/.045/.065/.080/.100/.130
hardware color: Black
Neck Dimensions:
Scale: 889mm
a: Width: 54mm at NUT
b: Width: 85mm at 24F
c: Thickness: 20mm at 1F
d: Thickness: 22mm at 12F
Radius: 950mmR